If you simply want to play the 1 or 2 player modes then the 'normal'
setup with 2 controllers as as shown on the right is fine.
Madden NFL '94, '95, '96, '97 and '98 also support up to 4 Players, they
expect a Multi-Tap to be connected on Port1 with 4 controllers as
shown below. Also ALL controllers should be set to '3 button' mode. |
Port 1 |
|
Port 2 |
|
|
|
|
Player 1 |
|
Player 2 |
|
In the Controller Settings window select
Teamplayer on Port 1 and setup your Keys/Joypads for Player
1 (Player1), Player 1-B (Player 2), Player 1-C (Player
3) and Player 1-D (Player 4). You can save this setup to a file, for
example "Madden.cfg" using the Save Config... option for later
use. You will need to reset (press Tab) for the changes to take effect.
This configuration also works in the 1, 2 and 3 Player modes using the
controllers in Player 1 (Player 1) and Player 1-B (Player 2)
and Player 1-C (Player 3).
|
|
|
Port 1 |
|
Port 2 |
|
|
|
|
|
|
|
|
|
|
|
|
Not Used |
|
|
|
|
|
|
Player 1 |
Player 2
(1-B) |
Player 3
(1-C) |
Player 4
(1-D) |
|
|
|