If you simply want to play the 1 or 2 player modes then the 'normal'
setup with 2 controllers as as shown on the right is fine.
Bill Walsh College Football and Bill Walsh College Football '95 also support
up to 4 Players, they expect a Multi-Tap to be connected on Port1
with 4 controllers as shown below. Also ALL controllers should be
set to '3 button' mode. |
Port 1 |
 |
Port 2 |
  |
 |
|
 |
Player 1 |
|
Player 2 |
|
In the Controller Settings window select
Teamplayer on Port 1 and setup your Keys/Joypads for Player
1 (Player1), Player 1-B (Player 2), Player 1-C (Player
3) and Player 1-D (Player 4). You can save this setup to a file, for
example "General Chaos.cfg" using the Save Config... option
for later use. You will need to reset (press Tab) for the changes
to take effect.
This configuration also works in the 1, 2 and 3 Player modes using the
controllers in Player 1 (Player 1) and Player 1-B (Player 2)
and Player 1-C (Player 3).
|
|
|
Port 1 |
 |
Port 2 |
|
|
|
  |
|
|
|
 |
|
 |
 |
|
Not Used |
 |
 |
 |
 |
|
|
Player 1 |
Player 2
(1-B) |
Player 3
(1-C) |
Player 4
(1-D) |
|
|
|